收稿日期: 2025-06-30
网络出版日期: 2025-11-05
基金资助
陕西省重点研发计划(2022SF-146)
Comparison of the effects of CAD/CAM and conventional impression‑making of lithium disilicate ceramic high inlay restorations on molar endodontically treated teeth and chewing function
Received date: 2025-06-30
Online published: 2025-11-05
目的 比较CAD/CAM技术与常规印模制作的二硅酸锂陶瓷高嵌体修复无髓后牙缺损的临床效果及对咀嚼功能的影响。 方法 本项前瞻性随机对照试验于2021年2月至2023年2月，共纳入104例需要后牙二硅酸锂陶瓷高嵌体修复的患者。随机数字表法将患者分为两组，52例采用CAD/CAM技术制作二硅酸锂陶瓷高嵌体（研究组），52例采用常规印模制作二硅酸锂陶瓷高嵌体（对照组）。比较两组患者的牙龈指数、牙齿松动度、菌斑指数、咀嚼效率、患者美观满意度及不良反应发生情况。 结果 修复后，研究组患者的牙齿松动、牙龈及菌斑指数均低于对照组（P < 0.05）。修复1年后，研究组咀嚼效率高于对照组（P < 0.05）。研究组高嵌体修复后不良反应发生率5.77%，低于对照组的25.00%（P < 0.05）。研究组高嵌体修复后美观满意度为94.23%，较对照组高，差异有统计学意义（P < 0.05）。 结论 CAD/CAM技术在修复无髓后牙缺损时，相较于常规印模制作，能够提供更好的修复体适合度和咀嚼效率，且更能提高患者满意度。这表明CAD/CAM技术在后牙高嵌体修复中具有明显优势，值得临床推广使用。
孟亚军 , 李莉 , 郜珍燕 . CAD/CAM与常规印模制作二硅酸锂陶瓷高嵌体修复无髓后牙缺损的效果及对咀嚼功能的影响[J]. 实用医学杂志, 2025 , 41(20) : 3214 -3219 . DOI: 10.3969/j.issn.1006-5725.2025.20.010
Objective This study aimed to compare the clinical efficacy and impact on masticatory function of lithium disilicate ceramic onlays fabricated using CAD/CAM technology versus conventional impression techniques for restoring pulpless posterior tooth defects. Methods A prospective randomized controlled trial was conducted from February 2021 to February 2023， enrolling 104 patients requiring lithium disilicate ceramic onlay restoration for posterior teeth. Patients were randomized into two groups using a random number table： 52 patients in the study group received lithium disilicate ceramic onlays fabricated with CAD/CAM technology， and 52 patients in the control group received onlays fabricated via conventional impression. The two groups were compared in terms of gingival index， tooth mobility， plaque index， masticatory efficiency， patient satisfaction with aesthetics， and incidence of adverse reactions. Results After restoration， the study group showed lower scores of tooth mobility， gingival index， and plaque index than the control group （P < 0.05）. One year after restoration， the masticatory efficiency of the study group was higher than that of the control group （P < 0.05）. The incidence of adverse reactions in the study group was 5.77%， which was significantly lower than 25.00% in the control group （P < 0.05）. The aesthetic satisfaction rate in the study group was 94.23%， which was significantly higher than that in the control group （P < 0.05）. Conclusions Compared with conventional impression techniques， CAD/CAM technology provides better restoration fit and masticatory efficiency， and improves patient satisfaction when restoring pulpless posterior tooth defects. These findings indicate that CAD/CAM technology has significant advantages in posterior tooth onlay restoration and is worthy of clinical promotion.
| [1] | IKBAL M， SHEN Y W， RUSLIN M，et al. Evaluation of sagittal root position and labial alveolar bone concavity in the maxillary anterior tooth area for immediate implant placement［J］. J Chin Med Assoc， 2023， 86（6）：565-570. doi:10.1097/jcma.0000000000000929 |
| [2] | BAGEGNI A， BORCHERS J， BEISEL S， et al. Bonding Strength of Various Luting Agents between Zirconium Dioxide Crowns and Titanium Bonding Bases after Long-Term Artificial Chewing［J］. Materials （Basel）， 2023， 16（23）：7314. doi:10.3390/ma16237314 |
| [3] | SUKSAWAT N， ANGWARAVONG O， ANGWARAWONG T. Fracture resistance and fracture modes in endodontically treated maxillary premolars restored using different CAD-CAM onlays［J］. J Prosthodont Res， 2024， 68（2）：290-298. doi:10.2186/jpr.jpr_d_22_00311 |
| [4] | TANVEER W， RIDWAN-PRAMANA A， MOLINERO-MOURELLE P， et al. Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Auricular Prostheses—Systematic Review［J］. J Clin Med， 2023， 12（18）： 5950. doi:10.3390/jcm12185950 |
| [5] | CHUCHULSKA B， DIMITROVA M， VLAHOVA A， et al. Comparative Analysis of the Mechanical Properties and Biocompatibility between CAD/CAM and Conventional Polymers Applied in Prosthetic Dentistry［J］. Polymers， 2024， 16（7）： 877. doi:10.3390/polym16070877 |
| [6] | ALHOMUOD M， PHARK J H， DUARTE S J R. Bond strength to different CAD/CAM lithium disilicate reinforced ceramics［J］. J Esthet Restor Dent， 2023， 35（1）：129-137. doi:10.1111/jerd.12984 |
| [7] | CANTO-NAVES O， MICHELS K， FIGUERAS-ALVAREZ O， et al. In Vitro Comparison of Internal and Marginal Adaptation between Printed and Milled Onlays［J］. Materials （Basel）， 2023， 16（21）：6962. doi:10.3390/ma16216962 |
| [8] | SHI R， MENG X， FENG R，et al. Stress Distribution and Fracture Resistance of repairing Cracked Tooth with Fiber-reinforced Composites and Onlay［J］. Aust Endod J， 2022，48（3）：458-464. doi:10.1111/aej.12578 |
| [9] | MICHAUD P L， DORT H. Do onlays and crowns offer similar outcomes to posterior teeth with mesial-occlusal-distal preparations？ A systematic review［J］. J Esthet Restor Dent， 2024， 36（2）：295-302. doi:10.1111/jerd.13114 |
| [10] | MATSUNO H， WADA J， MURAKAMI N，et al. Evaluation of hypermobile teeth deviation during impression taking in a partially edentulous dental arch： An in vitro study comparing digital and conventional impression techniques［J］. J Prosthodont Res， 2025， 69（2）：259-266. doi:10.2186/jpr.jpr_d_23_00326 |
| [11] | WALDECKER M， RUES S， AWOUNVO AWOUNVO J S，et al. In vitro accuracy of digital and conventional impressions in the partially edentulous maxilla［J］. Clin Oral Investig， 2022， 26（11）：6491-6502. doi:10.1007/s00784-022-04598-4 |
| [12] | ISLAM M S， AL-FAKHRI A， RAHMAN M M. Computer aided design/computer aided manufacturing （CAD/CAM） technology in the undergraduate dental programs in the MENA region［J］. Eur J Dent Educ， 2024， 28（1）：142-147. doi:10.1111/eje.12930 |
| [13] | KOUJI S， YAMANI A EL. A Multi-Disciplinary Approach to Managing Anterior Aesthetics： Crown Lengthening/Digital Smile Design （DSD）/Computer-Aided Design and Computer-Aided Manufacturing （CAD/CAM）［J］. Cureus， 2025， 17（6）：e85961. |
| [14] | AHMED N， ABBASI M S， HAIDER S， et al. Fit Accuracy of Removable Partial Denture Frameworks Fabricated with CAD/CAM， Rapid Prototyping， and Conventional Techniques： A Systematic Review［J］. Biomed Res Int， 2021， 2021：3194433. doi:10.1155/2021/3194433 |
| [15] | LEBERFINGER A N， JONES C M， MACKAY D R，et al. Computer-Aided Design and Manufacture of Intraoral Splints： A Potential Role in Cleft Care［J］. J Surg Res， 2021， 261：173-178. doi:10.1016/j.jss.2020.11.085 |
| [16] | SEGUNDO ? R T C， SARAIVA S， DE CASTRO C，et al. CAD-CAM natural restorations-Reproducing nature using a digital workflow［J］. J Esthet Restor Dent， 2023， 35（7）：993-1000. doi:10.1111/jerd.13028 |
| [17] | HAUSDORFER T， LECHTE C， KANZOW P，et al. Periodontal health in teeth treated with deep-margin-elevation and CAD/CAM partial lithium disilicate restorations-a prospective controlled trial［J］. Clin Oral Investig， 2024， 28（12）：670. doi:10.1007/s00784-024-06053-y |
| [18] | HEBOYAN A， MANRIKYAN M， ZAFAR M S，et al. Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses： An In Vivo Study［J］. Int J Mol Sci， 2021， 22（11）：5463. doi:10.3390/ijms22115463 |
| [19] | 刘芳，罗田雨，刘书婷，等. 种植机器人对前牙美学区即刻种植患者口腔功能与美学效果影响［J］. 实用医学杂志，2024，40（18）：2584-2589. |
| [20] | HYSPLER P， URBANOVA P， DOSTALOVA T. Comparison of the reverse scan technique with an intraoral scanner and the traditional impression technique［J］. J Prosthet Dent， 2024：S0022-3913（24）00583-3. doi:10.1016/j.prosdent.2024.08.012 |
| [21] | WANG Z， LIU J， WANG X，et al. Effect of CAD/CAM Guide Plate Combined With Socket-Shield Technique in Immediate Implantation of Anterior Teeth Aesthetic Area and Its Influence on Aesthetics［J］. Front Surg， 2022， 8：833288. doi:10.3389/fsurg.2021.833288 |
| [22] | SAADEDDIN N， AL-KHALIL M A， AL-ADEL O. Effect of immediate dentin sealing on the fracture strength of lithium disilicate ceramic onlays［J］. Swiss Dent J， 2022， 132（7-8）：482-489. doi:10.61872/sdj-2022-07-08-01 |
| [23] | MOUROUZIS P， DIONYSOPOULOS D， TOLIDIS K. Accuracy of CAD/CAM Technology in Fabricating Custom Post-and-Core Restorations： A Comparative Analysis［J］. J Esthet Restor Dent， 2025， 37（6）：1575-1584. doi:10.1111/jerd.13438 |
| [24] | BANSOD A， PISULKAR S G， BERI A，et al. Crafting Confidence： A Comprehensive Case Study of Full-Mouth Reconstruction Utilizing Implant-Supported Computer-Aided Design/Computer-Aided Manufacturing （CAD/CAM） Zirconia Restorations［J］. Cureus， 2024， 16（7）：e65897. |
| [25] | WEI X， PAN Y， WANG M，et al. Comparative analysis of leaching residual monomer and biological effects of four types of conventional and CAD/CAM dental polymers： An in vitro study［J］. Clin Oral Investig， 2022， 26（3）：2887-2898. doi:10.1007/s00784-021-04271-2 |
/
| 〈 |
|
〉 |