收稿日期: 2023-10-25
网络出版日期: 2024-03-26
基金资助
国家自然科学基金项目(82201026);安徽医科大学基础与临床合作研究提升计划(2021xkjT038)
Research advances in the accuracy of 3D printing prosthesis
Received date: 2023-10-25
Online published: 2024-03-26
崔雅楠 , 张亨国 . 3D打印技术制作修复科义齿的精准度的研究进展[J]. 实用医学杂志, 2024 , 40(5) : 708 -713 . DOI: 10.3969/j.issn.1006-5725.2024.05.020
Prosthodontic dentures are used to treat tooth defects， dentition defects and dentition loss， which can restore the appearance and function of the patient's oral cavity. With the advent of the digital age， 3D printing technologies have slowly gained widespread popularity. In the field of prosthodontics， 3D printing can manufacture materials including resins， waxes， metals， and ceramics. Besides， it can produce fixed， movable， implant dentures and dental models required for dentures. 3D printing can produce complicated things with a high material consumption rate， simplifying denture manufacture. In addition， the accuracy of 3D printed prosthesis is directly related to the comfort and durability. This article summarizes the process of accuracy of 3D printed dental prosthesis at home and abroad in recent years and provides clues for better 3D printing application.
Key words： digital; 3D printing; dental prosthesis; accuracy
| 1 | SMITH P B， PERRY J， ELZA W. Economic and Clinical Impact of Digitally Produced Dentures ［J］. J Prosthodont， 2021， 30（S2）： 108-112. doi:10.1111/jopr.13283 |
| 2 | TIAN Y， CHEN C， XU X， et al. A Review of 3D Printing in Dentistry： Technologies， Affecting Factors， and Applications ［J］. Scanning， 2021， 2021： 9950131. doi:10.1155/2021/9950131 |
| 3 | 潘昕瑶， 李婷， 吴耀彬， 等. 生物3D打印在大面积骨骼肌损伤中应用研究进展 ［J］. 实用医学杂志， 2022， 38（20）： 2510-2517. |
| 4 | PILLAI S， UPADHYAY A， KHAYAMBASHI P， et al. Dental 3D-Printing： Transferring Art from the Laboratories to the Clinics ［J］. Polymers （Basel）， 2021， 13（1）： 13010157. doi:10.3390/polym13010157 |
| 5 | 张浩， 张钰， 肖世宁， 等. 3D打印仿生支架在脊髓损伤修复中的研究进展 ［J］. 实用医学杂志， 2022， 38（22）： 2868-2873. doi:10.3969/j.issn.1006-5725.2022.22.019 |
| 6 | KIHARA H， SUGAWARA S， YOKOTA J， et al. Applications of three-dimensional printers in prosthetic dentistry ［J］. J Oral Sci， 2021， 63（3）： 212-216. |
| 7 | ACHARYA A， CHODANKAR R N， PATIL R， et al. Assessment of knowledge， awareness， and practices toward the use of 3D printing in dentistry among dental practitioners and dental technicians： A cross-sectional study ［J］. J Oral Biol Craniofac Res， 2023， 13（2）： 253-258. doi:10.1016/j.jobcr.2023.02.001 |
| 8 | AMORNVIT P， ROKAYA D， SANOHKAN S. Comparison of Accuracy of Current Ten Intraoral Scanners ［J］. Biomed Res Int， 2021， 2021： 2673040. doi:10.1155/2021/2673040 |
| 9 | DONMEZ M B， YILMAZ B， YOON H I， et al. Effect of computer-aided design and computer-aided manufacturing technique on the accuracy of fixed partial denture patterns used for casting or pressing ［J］. J Dent， 2023， 130： 104434. doi:10.1016/j.jdent.2023.104434 |
| 10 | JAMJOOM F Z， ALDGHIM A， ALDIBASI O， et al. Impact of intraoral scanner， scanning strategy， and scanned arch on the scan accuracy of edentulous arches： An in vitro study ［J］. J Prosthet Dent， 2023，S0022-3913（23）00069-0. doi:10.1016/j.prosdent.2023.01.027 |
| 11 | YEAGER B， ?AKMAK G， ZHENG F， et al. Error analysis of stages involved in CBCT-guided implant placement with surgical guides when different printing technologies are used ［J］. J Prosthet Dent， 2023，S0022-3913（22）00744-2. doi:10.1016/j.prosdent.2022.11.018 |
| 12 | PIEDRA-CASCóN W， FOUNTAIN J， ATT W， et al. 2D and 3D patient's representation of simulated restorative esthetic outcomes using different computer-aided design software programs ［J］. J Esthet Restor Dent， 2021， 33（1）： 143-151. doi:10.1111/jerd.12703 |
| 13 | DHANOTRA K G， BHATIA R. Digitainers-Digital Space Maintainers： A Review ［J］. Int J Clin Pediatr Dent， 2021， 14（）： S69-S75. doi:10.5005/jp-journals-10005-2040 |
| 14 | KESSLER A， HICKEL R， REYMUS M. 3D Printing in Dentistry-State of the Art ［J］. Oper Dent， 2020， 45（1）： 30-40. doi:10.2341/18-229-l |
| 15 | DEHURTEVENT M， ROBBERECHT L， THUAULT A， et al. Effect of build orientation on the manufacturing process and the properties of stereolithographic dental ceramics for crown frameworks ［J］. J Prosthet Dent， 2021， 125（3）： 453-461. doi:10.1016/j.prosdent.2020.01.024 |
| 16 | YOON S N， OH K C， LEE S J， et al. Tissue surface adaptation of CAD-CAM maxillary and mandibular complete denture bases manufactured by digital light processing： A clinical study ［J］. J Prosthet Dent， 2020， 124（6）： 682-689. doi:10.1016/j.prosdent.2019.11.007 |
| 17 | REVILLA-LEóN M， MEYER M J， ?ZCAN M. Metal additive manufacturing technologies： literature review of current status and prosthodontic applications ［J］. Int J Comput Dent， 2019， 22（1）： 55-67. |
| 18 | 李晓雪， 樊世锋， 侯晓薇. 3D打印生物陶瓷材料在口腔修复领域的研究进展 ［J］. 中国现代医学杂志， 2023， 33（4）： 39-45. doi:10.3969/j.issn.1005-8982.2023.04.008 |
| 19 | SHIM J S， KIM J E， JEONG S H， et al. Printing accuracy， mechanical properties， surface characteristics， and microbial adhesion of 3D-printed resins with various printing orientations ［J］. J Prosthet Dent， 2020， 124（4）： 468-475. doi:10.1016/j.prosdent.2019.05.034 |
| 20 | JIN S J， KIM D Y， KIM J H， et al. Accuracy of Dental Replica Models Using Photopolymer Materials in Additive Manufacturing： In Vitro Three-Dimensional Evaluation ［J］. J Prosthodont， 2019， 28（2）： e557-e562. doi:10.1111/jopr.12928 |
| 21 | KHALEDI A A， FARZIN M， AKHLAGHIAN M， et al. Evaluation of the marginal fit of metal copings fabricated by using 3 different CAD-CAM techniques： Milling， stereolithography， and 3D wax printer ［J］. J Prosthet Dent， 2020， 124（1）： 81-86. doi:10.1016/j.prosdent.2019.09.002 |
| 22 | 张杰， 林欣芳， 杨雲夫， 等. 层厚对3D打印临时冠精度的影响研究 ［J］. 实用口腔医学杂志， 2023， 39（5）： 578-583. doi:10.3969/j.issn.1001-3733.2023.05.004 |
| 23 | WANG W， YU H， LIU Y， et al. Trueness analysis of zirconia crowns fabricated with 3-dimensional printing ［J］. J Prosthet Dent， 2019， 121（2）： 285-291. doi:10.1016/j.prosdent.2018.04.012 |
| 24 | LI R， XU T， WANG Y， et al. Accuracy of zirconia crowns manufactured by stereolithography with an occlusal full-supporting structure： An in vitro study ［J］. J Prosthet Dent， 2023，130（6）：902-907. doi:10.1016/j.prosdent.2022.01.015 |
| 25 | LüCHTENBORG J， WILLEMS E， ZHANG F， et al. Accuracy of additively manufactured zirconia four-unit fixed dental prostheses fabricated by stereolithography， digital light processing and material jetting compared with subtractive manufacturing ［J］. Dent Mater， 2022， 38（9）： 1459-1469. doi:10.1016/j.dental.2022.06.026 |
| 26 | LIM Y A， KIM J M， CHOI Y， et al. Evaluation of Fitness and Accuracy of Milled and Three-Dimensionally Printed Inlays ［J］. Eur J Dent， 2023，17（4）：1029-1036. doi:10.1055/s-0042-1758796 |
| 27 | SAMPAIO C S， NIEMANN K D， SCHWEITZER D D， et al. Microcomputed tomography evaluation of cement film thickness of veneers and crowns made with conventional and 3D printed provisional materials ［J］. J Esthet Restor Dent， 2021， 33（3）： 487-495. doi:10.1111/jerd.12651 |
| 28 | ALIFUI-SEGBAYA F， WILLIAMS R J， GEORGE R. Additive Manufacturing： A Novel Method for Fabricating Cobalt-Chromium Removable Partial Denture Frameworks ［J］. Eur J Prosthodont Restor Dent， 2017， 25（2）： 73-78. |
| 29 | ALABDULLAH S A， HANNAM A G， WYATT C C， et al. Comparison of digital and conventional methods of fit evaluation of partial removable dental prosthesis frameworks fabricated by selective laser melting ［J］. J Prosthet Dent， 2022， 127（3）： 478.e471-478.e410. doi:10.1016/j.prosdent.2021.09.033 |
| 30 | GAO C， WANG C， JIN H， et al. Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics ［J］. RSC Adv， 2018， 8（44）： 25210-25227. doi:10.1039/c8ra04815k |
| 31 | ROKHSHAD R， TEHRANI A M， NAHIDI R， et al. Fit of removable partial denture frameworks fabricated from 3D-printed patterns versus the conventional method： An in vitro comparison ［J］. J Prosthet Dent，2022， S0022-3913（22）00210-4. doi:10.1016/j.prosdent.2022.03.027 |
| 32 | TASAKA A， SHIMIZU T， KATO Y， et al. Accuracy of removable partial denture framework fabricated by casting with a 3D printed pattern and selective laser sintering ［J］. J Prosthodont Res， 2020， 64（2）： 224-230. doi:10.1016/j.jpor.2019.07.009 |
| 33 | NEGM E E， ABOUTALEB F A， ALAM-ELDEIN A M. Virtual Evaluation of the Accuracy of Fit and Trueness in Maxillary Poly（etheretherketone） Removable Partial Denture Frameworks Fabricated by Direct and Indirect CAD/CAM Techniques ［J］. J Prosthodont， 2019， 28（7）： 804-810. doi:10.1111/jopr.13075 |
| 34 | ANADIOTI E， MUSHARBASH L， BLATZ M B， et al. 3D printed complete removable dental prostheses： a narrative review ［J］. BMC Oral Health， 2020， 20（1）： 343. doi:10.1186/s12903-020-01328-8 |
| 35 | SONG S， ZHANG J， LIU M， et al. Effect of build orientation and layer thickness on manufacturing accuracy， printing time， and material consumption of 3D printed complete denture bases ［J］. J Dent， 2023， 130： 104435. doi:10.1016/j.jdent.2023.104435 |
| 36 | LEE S， HONG S J， PAEK J， et al. Comparing accuracy of denture bases fabricated by injection molding， CAD/CAM milling， and rapid prototyping method ［J］. J Adv Prosthodont， 2019， 11（1）： 55-64. doi:10.4047/jap.2019.11.1.55 |
| 37 | WANG C， SHI Y F， XIE P J， et al. Accuracy of digital complete dentures： A systematic review of in vitro studies ［J］. J Prosthet Dent， 2021， 125（2）： 249-256. doi:10.1016/j.prosdent.2020.01.004 |
| 38 | BARBIN T， VEL?SO D V， DEL RIO SILVA L， et al. 3D metal printing in dentistry： An in vitro biomechanical comparative study of two additive manufacturing technologies for full-arch implant-supported prostheses ［J］. J Mech Behav Biomed Mater， 2020， 108： 103821. doi:10.1016/j.jmbbm.2020.103821 |
| 39 | PANJNOUSH M， KHEIRANDISH Y， SHARIFI R， et al. Effect of slice thickness of 3D printer in fabrication of surgical guide on the accuracy of dental implant placement ［J］. J Oral Implantol， 2023， PMID：. doi:10.1563/aaid-joi-d-21-00179 |
| 40 | YEUNG M， ABDULMAJEED A， CARRICO C K， et al. Accuracy and precision of 3D-printed implant surgical guides with different implant systems： An in vitro study ［J］. J Prosthet Dent， 2020， 123（6）： 821-828. doi:10.1016/j.prosdent.2019.05.027 |
| 41 | SHI Y， WANG J， MA C， et al. A systematic review of the accuracy of digital surgical guides for dental implantation ［J］. Int J Implant Dent， 2023， 9（1）： 38. doi:10.1186/s40729-023-00507-w |
| 42 | IWAMOTO M， ATSUTA W， KANEKO Y， et al. Investigating the implant position reproducibility of optical impressions obtained using an intraoral scanner and 3D-printed models fabricated using an intraoral scanner ［J］. Int J Implant Dent， 2023， 9（1）： 14. doi:10.1186/s40729-023-00481-3 |
| 43 | REVILLA-LEóN M， SáNCHEZ-RUBIO J L， OTEO-CALA-TAYUD J， et al. Impression technique for a complete-arch prosthesis with multiple implants using additive manufacturing technologies ［J］. J Prosthet Dent， 2017， 117（6）： 714-720. doi:10.1016/j.prosdent.2016.08.036 |
| 44 | BROWN G B， CURRIER G F， KADIOGLU O， et al. Accuracy of 3-dimensional printed dental models reconstructed from digital intraoral impressions［J］. Am J Orthod Dentofacial Orthop， 2018， 154（5）： 733-739. doi:10.1016/j.ajodo.2018.06.009 |
| 45 | SHERMAN S L， KADIOGLU O， CURRIER G F， et al. Accuracy of digital light processing printing of 3-dimensional dental models ［J］. Am J Orthod Dentofacial Orthop， 2020， 157（3）： 422-428. doi:10.1016/j.ajodo.2019.10.012 |
| 46 | JANG Y， SIM J Y， PARK J K， et al. Accuracy of 3-unit fixed dental prostheses fabricated on 3D-printed casts ［J］. J Prosthet Dent， 2020， 123（1）： 135-142. doi:10.1016/j.prosdent.2018.11.004 |
| 47 | PARK J M， JEON J， KOAK J Y， et al. Dimensional accuracy and surface characteristics of 3D-printed dental casts ［J］. J Prosthet Dent， 2021， 126（3）： 427-437. doi:10.1016/j.prosdent.2020.07.008 |
| 48 | YOUNG KIM R J， CHO S M， JUNG W S， et al. Trueness and surface characteristics of 3-dimensional printed casts made with different technologies ［J］. J Prosthet Dent， 2023，S0022-3913（22）00750-8. doi:10.1016/j.prosdent.2022.12.002 |
/
| 〈 |
|
〉 |